03

Dec

All Details Of Our Product

Technical Specifications
MODEL Bed Length Admit Between Width of Bed Swing Dia. Over Bed Swing Dia. Over Carriage Swing Dia. Over Cross Slide Swing Dia. In GAP Bad Weight Floor Space
Center Height 558mm (22″) Approx KGs. L x W
724225 7ft. (2130mm) 600 609mm (24″) Dia. 1065mm (42″) Dia. 900mm (36″) Dia. 800mm (32″) Dia. 1470mm (58″) 3700 2500 x 1600
924225 9ft. (2740mm) 1200 4150 3100 x 1600
1024225 10ft. (3050mm) 1500 4550 3400 x 1600
1224225 12ft. (2660mm) 2100 4950 4000x 1600
1424225 14ft. (4270mm) 2700 5350 4600x 1600
1624225 16ft. (4880mm) 3300 5850 5200x 1600
1824225 18ft.(5480mm) 3900 6250 5800x 1600
2024225 20ft. (6100mm) 4500 6750 7000x 1600
2424225 24ft. (7315mm) 5100 7650 7600x 1600
2624225 26ft. (7920mm) 6700 8050 8200x 1600
2824225 28ft.(8530mm) 7300 8550 8800x 1600
3024225 30ft. (9150mm) 7900 8950 9400x 1600
General Specifications
Bed Typed 2V & 2 Flat typed Induction Hardened & Precisely Grounded Bedways
Spindle Speeds (In V-Belts Driven) 8 Speeds 20 to 300 rpm
Spindle Speeds (In All-Geared Driven) (OPTIONAL) 16 Speeds 12 / 380 rpm
Spindle Nose (In Belt Driven) 6 TPI MT-7 A2-8 -OR-A2-11(OPTIONAL)
Spindle Bore Std. 130mm / 155mm Available
Tailstock Ram Dia. 76.1 mm
Tailstock Taper Size MT – 5
Nos. of Feeds for LONGITUDINAL (With Change Gears) INCH & MM Infinitely Variable
Nos. of Feeds for TRANSVERSE  (With Change Gears) INCH & MM
Nos. of Feeds for LONGITUDINAL (With Norton Gear Box) INCH & MM 0.065 to 1.98 mm/rev.
Nos. of Feeds for TRANSVERSE (With Norton Gear Box) INCH & MM 0.016 to 0.48 mm/rev.
Transverse Movement in MM 500 / 600
Nos. of Threads & Range (Norton Gear Box) 28 in INCH 20 in MM
1.5 to 22 TPI 0.75 to 16
Lead Screw Dia. / TPI 50 / 2TPI
Elc. Motor Requires (2-Speed) 7.5 HP / 10 HP 960 / 1400rpm 3Phase 50Hz
Accessories
Standard Accessories Optional Accessories
Induction Hardened & Precisely Ground 2V & 2Flat Type Bed Ways True Chuck
Dog Chuck 1no. Steady Rest
Chuck Back Plate 1no. Follow Rest
7.5HP. 3Phase, 960 / 1440 RPM Elc. Motor (2- Speed) 1no. Face Plate
Motor Pulley 1no. All-Geared Headstock
V-Belt 1no. Norton Gear Box Having INCH & MM Threads
R/F Switch + wiring Complete 1Set. Electro Coolant Pump with Tank & Stand Fittings
Spindle Nose Sleeve 1no. Taper Turning Attachment
Dead Centers 2nos. Anti Vibration Leveling Ped Sets.
Tool Post Key 1no. Revolving Center
Service Spanner Set. 1Set. Machine Lamp Stand
Alen Keys Set 1Set. Quick Change Tool Post
Change Gear Set INCH / MM 1Set. Tool Post Grinnding Attachment
Oil Cane 1no. Key-Way Cutting Attachment with Elc. Motor
Milling Vice
Splash Guard
PLANO Type Extra Heavy Duty Bed Available in all above model on request 155mm (6″) Spindle Bore
COMPLETE CNC CONTROLED RETRO FITTING HAVING LATHE MACHINE